Shopping Cart

Your cart is empty.

Your cart is empty.

Carburetor for Troy-Bilt Storm 2410 31AM62N2711 24' Snow Thrower Troy-Bilt 2100 Squall 31AS2P5C711 31AM2P5B 21' Walk-Behind Snow Thrower

Free shipping on orders over $29.99

$22.55

$ 11 .99 $11.99

In Stock

About this item

  • Replaces Troy-Bilt Storm 2410 31AM62N2711 24" Snow Thrower; Replaces Troy-Bilt 2100 Squall 31AS2P5C711 31AM2P5B 21" Walk-Behind Snow Thrower
  • Replaces Huayi 165S 165SA; Stens 520-862; Cub Cadet 165-SUB 265-SU 365-SUB
  • Replaces MTD 31A-32AD700 31A-32AD706 31A-32AD729 31A-32AD752 31A-32AD762 31A-62EE729 31AH62EE000 31AM2N1B301 31AM2N1B304 31AM2N1B307 31AM2N1B371 31AM2N1B372 31AM2N1B382 31AM2N1B401 31AM2N1B513 31AM2N1B700 Snow Blower
  • Package comes with: 1 x carburetor, 3 x gaskets, 1 x primer hose, 1 x fuel hose, 1 x fuel filter, 1 x shut-off valve, 1 x primer bulb, 2 x small clamp, 2 x large clamp



Product Description

951-12705

Replaces MTD 951-10974 951-10974A 951-12705

Center to center mounting hole distance: 40.97mm/1.61''

Central bore diameter: 19mm/0.74''

Replaces Huayi 165S 165SA

Replaces Stens 520-862

Replaces Cub Cadet 165-SUB 265-SU 365-SUB

Replaces Troy Bilt 31AM62N2711 (600 series) and 31AM2N1B795 (2008)

Center to Center Mounting Hole Distance: 40.97mm/1.61''

Primer Port Nozzle O.D.: 5mm/0.2''

Fuel Inlet Nozzle O.D.: 9mm/0.35''

Replaces MTD 31A-32AD700 31A-32AD706 31A-32AD729 31A-32AD752 31A-32AD762 31A-62EE729 31AH62EE000 31AM2N1B301 31AM2N1B304 31AM2N1B307 31AM2N1B371 31AM2N1B372 31AM2N1B382 31AM2N1B401 31AM2N1B513 31AM2N1B700 31AM2N1B704 31AM2N1B706 31AM2N1B709 31AM2N1B713 31AM2N1B720 31AM2N1B729 31AM2N1B730 31AM2P5B704 31AM62EE700 31AM62EE706 31AM62EE731 31AM62EE752 31AM62EE799 31AM62KE704 31BM62EE799 31BM62KE704

Center to Center Mounting Hole Distance: 40.97mm/1.61'' Central Bore Diameter: 19mm/0.74''

11

11

11

11

Package comes with all parts listed below

  • 1 x carburetor
  • 3 x gaskets
  • 1 x primer hose
  • 1 x fuel hose
  • 1 x fuel filter
  • 1 x shut-off valve
  • 1 x primer bulb
  • 2 x small clamps
  • 2 x large clamps

Placeholder
Reviewed in the United States on February 3, 2025
Excellent quality and price. Show blower up and running
Jeffrey Tyrone
Reviewed in the United States on February 19, 2025
Work as expected pretty easy install if you nlknow a think or 2 about tools and stuff
Andrew Skura
Reviewed in the United States on February 15, 2025
The carburetor was an exact match. One small problem. The carburetor primer fitting on the carburetor was broken. It was a plastic hose Barb fitting that got broken in shipping. Didn’t have time to send it back and used epoxy to fix the problem. When all was assembled, snow blower fired right up. I was very happy. Blowing snow in Indiana!
regapal
Reviewed in the United States on February 23, 2024
Seems well made. Carburetor was an exact replacement for the original on my Troybilt Storm 2410. It was moderately easy to install; I say this since this was a first for me, so the learning curve was kind of high. The bolt holes lined up perfectly, the gaskets were well made; however, on the one that mates with the back of the carburetor, the small hole in the upper right of the gasket was off by, I'd say, about 1/32" from where the original one was located, but this didn't seem to keep the engine from running smoothly. The engine hadn't been able to run on the lean setting for quite some time; I'd say probably about 6 years, and I was having to run it on about half-choked for it to run smoothly, but no more, replacing the carburetor took care of that problem. I think this was because the old carburetor's jets must be partially plugged. I thought about taking it apart and cleaning them and reinstalling, but heck, for just $19 why not just replace it? I was very surprised when I opened the box and found that the kit (and it is a kit, not just a carb) included gaskets, a fuel shut off valve, a primer bulb, a fuel filter, new clamps, and a short piece of vinyl tubing; that's what I call VALUE! Can't speak to quality since I just installed it yesterday, but there are very few moving parts so I expect it will last a long time. This, of course, is dependent on me draining or burning the fuel left in the tank and draining the fuel left in the carburetor bowl as well as using fresh fuel or adding fuel stabilizer to the left over fuel before storing it (Lucas upper cylinder lubricant fuel stabilizer is a great product to use for this).
Jeff
Reviewed in the United States on December 31, 2024
Read alot of reviews for this Carb, the most concerning thing I read were the gaskets don't match OEM. THEY DO, all 4 from intake valve all the way out to the air intake gasket were exact no trimming no home made gaskets needed. My 13 year old Troybilt storm 2410 has been through 2 carb rebuilds on the original and this year it just could not run right. I took a flyer on this new carb and now it is running like new. Worth every penny of the $18 price tag even if it lasts for just one season (I'll buy one every year if it saves me from buying a new machine at $900+)
Philippe
Reviewed in the United States on December 30, 2024
Product came with all of the gaskets needed to complete the job.Added fresh fuel and the Troy-Bilt snow blower ran well.A cost effective means to get your snow blower working again!
Customer
Reviewed in the United States on December 13, 2024
There was a holdup on shipping but the product was great. Bolted right up and started quickly. Lacked one gasket I thought would be there and another gasket had to be trimmed, but no big deal
Stephanie
Reviewed in the United States on November 4, 2024
Fits perfect : works great !
Recommended Products

$15.21

$ 6 .99 $6.99

4.4
Select Option