Your cart is empty.
Your cart is empty.Clear Weld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. Clear Weld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. Clear Weld has a 1: 1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 4400 PSI, Clear Weld sets to a hard, permanent bond.
Peter Hanson
Reviewed in the United States on December 4, 2024
JB Weld glues most things together quickly and permanently. It's easy to use, just open the end, squirt out some liquid from both tubes, mix, and apply. This clear is virtually invisible as a weld. Put the cap on, and the remaining epoxy liquids are preserved.
x
Reviewed in the United States on September 23, 2020
I used these to fix some thick pieces of tile under a woodstove in a cabin. This worked well to hold the broken tile together, as well as affix it to the base. There is a bit of smell but I made the repair and covered the tiles with painter's tape just before we left. When we returned a couple of weeks later, there was no odor. When we peeled off the tape, the tiles held just fine. Hoping that it continued to hold well over the fall when there's a fire in the woodstove, as well as in winter when the cabin is unheated.
ftv
Reviewed in the United States on September 18, 2020
It works. You must plan the work. you only have 5 mins or so before it hardens in the tube and is unmovable.
Jon in SF
Reviewed in the United States on July 2, 2020
So as a lot of other reviewers have mentioned, this can be messy and has no instructions for the mixing tube, but if you know what you are doing this is amazing.It is a single use tube, so don't even think about trying to take the mixing tube off and recap the syringe, as that would be a huge mess. Just set it up and go. You might need to use a pliers to twist on the mixing tube, but once you get it on, it rocks.The mixing tube design is a genius feature that was borrowed from high end construction epoxy and it works great in this application. Allows you to put the epoxy exactly where you need it. You don't have to mess with mixing in a dish and then using a stupid wood stick to get the glue in the correct spot.Maybe buy two tubes in case you screw up by learning on the first one.The net is, the mixing tube is a game changer if you know how to use it.Buy it.
Paulette Reaves
Reviewed in the United States on June 8, 2020
Was easy to use and works great. Dont make my mistake tho, use in a well ventilated area. It has a very strong smell when wet.
Kelly
Reviewed in the United States on June 5, 2020
Used this to repair a crack in our keurig water tank, worked perfect! Wish I would have seen this first, before I tried several tapes and they didn't work.
JpW
Reviewed in the United States on February 10, 2020
I am a big JB fan and have used other products and they worked fine. Decided to try this - HORRIBLE. This stuff is messy, especially if you use the "spiral" application tool. Not even sure the cap will come off the syringe next time I use this. No more of these for me.
user
Reviewed in the United States on January 1, 2020
Bought to use on key chain. It works very well, but my dislike about the product is it was horrible to open! Need to come up with another way,
Recommended Products
$47.95
$ 22 .99 $22.99