Your cart is empty.
Your cart is empty.Product Description
Also compatible with
Also works for 66-72 Ford Trucks and vintage Ford cars of similar age with minor modifications to the column tube. You will need to drill out three spot welds so that you can remove all parts of the stock bearing, and then my kit can be installed in its place. Please confirm fit by comparing with the dimensions given below.
Feature
Fits Right A full 2.125 inch outer diameter for a proper and snug fit in the column tube. 0.75 inch (shaft) inner diameter. 0.625 inch depth. Supplied with three stainless steel 1/4 inch cap screws and tapped mounting holes. This bearing will also work with Steeroids or similar power steering conversion kits for vintage Mustangs.
High-Quality
TOUGH 1/8 inch thick Drawn-Over-Mandrel (DOM) steel tubing is precisely cut, deburred, fitted into a jig for perfect concentricity, and MIG welded to the top plate where the bearing itself is secured. The bearing is a precision ground and sealed radial ball bearing. You will not find a stronger combination!
Compatible with
Lower Steering Column Bearing Perfect For 1973-1979 F-ord Trucks , 1976-1979 F-ord Broncos
Products include
- 1pcs Lower Steering Column Bearing
Terry Fraley
Reviewed in the United States on September 18, 2024
It's all good.
Miguel angel bautista
Reviewed in Mexico on August 19, 2024
Si es tal cual la pieza y muy útil 100% recomendado!!
Wholesale Rat
Reviewed in the United States on May 30, 2024
This part fit my iDidit steering column perfectly. I had to shorten the shaft and switch from a rag joint to a u-joint. This modification required a bearing support at the lower end of my column. Just remember to use aluminum anti-seize on the stainless steel screws to reduce the galvanic process between the dissimilar metal. If you don’t, you will never be able to take the screws out a year later.
Tom Goertzen
Reviewed in Canada on May 19, 2024
I bought this to build a steering column for my 69 f100 using parts from three different columns. It fits perfectly and having a sealed bearing will ensure this part will outlive me and maybe even outlive the truck
Kevin
Reviewed in the United States on May 16, 2024
The bearing is smooth, quality is good, the size is correct at ID .75 inch or 19mm. I have purchased the much more expensive steering column lower bearing and for the price I think this one is a steal. Fit in a 79 f150 steering column perfectly.
jerryh
Reviewed in the United States on December 17, 2024
Fit is perfect. All billet and solid unit. Would recommend and would buy again.
Maria Alvarado-Rogers
Reviewed in the United States on December 17, 2024
My steering shaft had lots of play due to worn out bearing I wasn’t sure if it would fit on my 68 highboy but it was perfect I had 4 spot weld’s on mine unlike this kit had 3 screws I had to drill new holes other than that I’m very pleased with the fit I definitely recommend this product
Steve YoHoe
Reviewed in the United States on November 18, 2024
1977 FORD F350Fantastic fix !Well thought out.Perfect fit.Thank you for a great product.
Geoff
Reviewed in the United States on October 9, 2024
Installation was exactly as written in the instructions.
Peter b.
Reviewed in Canada on October 19, 2024
Used for my steering colum on my 73 f100 perfect fit.
carl math
Reviewed in the United States on May 4, 2023
The one I ordered came with a 6203-rs bearing. A 6203-rs is a 17x40x12 bearing. At 17 mm it is too small to fit over the 3/4 inch steering shaft in my 1979 F-250. 3/4 of an inch in millimeters is 19.05mm. There are 19.5x40x12 bearings available. Stupidly, their part number is 6203-2rs. Whoever commented and said this had an aluminum center that they easily sanded must've gotten a different one than mine, because mine is a regular hard bearing material and I'm not going to sand it. I ordered the right bearing and put in the aluminum piece this company made.
Recommended Products
$99.99
$ 43 .99 $43.99