Your cart is empty.
Your cart is empty.Product Description
Thread Tape
Wrap the thread tape around the faucet threads to effectively prevent leaks
Bulkhead fitting
One end is mounted on the inside of the rain barrel, and the other end is mounted on the outside of the barrel and connected to the faucet
Spigot
Bulkhead fitting with 2 seals to prevent leaks and increase tightness
1/2 Garden Hose Hookup
Faucet barb fitting with one end connected to the faucet and the other end connected to the garden hose
K. P. Daniels
Reviewed in the United States on February 11, 2025
We had bought one a few months ago and had to replace it due to extreme low temps and frozen water in the rain barrel. Our fault for not emptying the barrel. Nice heavy duty
Melissa Tilson
Reviewed in the United States on August 19, 2024
Bought 3 for aquarium use. One for rodi, one for salt, and one waste. Everyone of them are leaving rust debree in my water!
L C Sale
Reviewed in Canada on July 7, 2024
The brass fittings were brass however the thread is too loose on the threaded barrel so spigot the spigot requires way too much thread seal to prevent leaks
Bob
Reviewed in the United States on July 23, 2024
Takes a contortionist to install. If you barrel has an open top, you will be fine, otherwise do not buy.
Roxanne & Brad Wallace
Reviewed in Canada on June 21, 2024
The Spigot is made of brass, so should last a long time. The Garden hose threading was NOT completely Finished to the base of the threads. Thus you could NOT completely secure a hose to the fitting and water leaked everywhere. I used a hand grinder and removed the unthreaded portion of the threading and was able to secure and tighten the garden hose to the output discharge of the spigot. The tolerances between the spigot itself and the adapter are very loose. Teflon tape is supplied, but a excess large amount was needed to stop a leak between the adapter and spigot. I did get everything to work properly, and yes i ordered another one for a 2nd rain barrel, but now I aware of the spigot and adapter deficiencies and will make the necessary correction before installation.
Lijia
Reviewed in Canada on June 13, 2024
I went to a friend's house to play and saw their 10 year old kids using it. It was great. I came home and immediately bought one. My 4 year old son loved it
Michaelene De'Lacianna Mills
Reviewed in the United States on May 18, 2024
My order arrived on time and in great condition. Thank you.
DOREEN SLONE
Reviewed in the United States on March 20, 2024
I love it!
noelle parrish
Reviewed in the United States on February 3, 2024
This product does exactly what needs to be done. We used doe a spout on our DIY rain barrel
Pamela Phillippe
Reviewed in the United States on June 9, 2023
The design of this spigot does not work for installing in a water barrel that does not have an open top, you can't reach the inside of the barrel. I used a string to guide the inside portion to the hole and pulled it through the hole. The threads on this piece are right handed. I tightened the nut. When I installed the spigot (also right hand threaded) and tightened it down it loosened the fitting in the barrel. I couldn't get it all to tighten. I purchased a different rain barrel spigot with the part installed in the barrel wall left hand threaded. When I installed the right handed spigot it all tightened down great.
Springtime
Reviewed in the United States on October 17, 2023
I am very happy with this purchase.
Recommended Products