Rhett Bushman
Reviewed in the United States on June 24, 2024
I use Fox 38 Float forks up front and the included pin doesn't come close to making it all the way through.
Redge R.
Reviewed in the United Arab Emirates on June 4, 2023
Very well made. My bike won't go anywhere once it is locked.
Kamala GURUNG
Reviewed in the United States on February 11, 2022
The media could not be loaded.
Laurent
Reviewed in France on July 25, 2020
Bon rapport qualité prix de cette fixation. Dommage qu'elle ne soit pas fournie avec les boulons collet carré TRCC M6 qui permettent la fixation sur le rail coulissant (1,2m) SARIS.
Merlin
Reviewed in Canada on April 13, 2020
Very solid well built, I use it for my special project , an adjustable height front fork mount for my Elite direct drive trainer.Very think material that I am able to drill some holes and still very solid
Robert
Reviewed in the United States on May 17, 2019
Works great, solid mount.
Rodrigo
Reviewed in Mexico on February 27, 2019
El producto es como se describe
B. Felsher
Reviewed in the United States on October 3, 2019
Works great. I mounted to a 2x2 using wood screws, cut the 2x2 length to press fit into grooves in my truck bed. It's a solid mount.
Idella
Reviewed in the United States on October 13, 2015
Best way to store my bike in the suv, I wish I had of known of this years ago. Love this item. I suggest this to anyone with a suv or truck.
JMS
Reviewed in the United States on January 2, 2015
I have a total of 4 of these. Two are over 10 years old. I just purchased two new ones. They mount perfectly on a vertical 2x6 (think: skinny side) that slides into grooves in the bed of my pick-up. Cheap, easy solution for hauling bikes.
Graham Cowley
Reviewed in the United Kingdom on December 4, 2014
solid and does the job, I attached two of these side by side so I could mount both my girlfriends and my bikes in the back of my Pajero, using a length of solid pine and glued a waterproof material on it. With a drive through some winding and hilly area's both bikes stayed in place, I'd recommend using a foam block or bag at the back of the bikes to stop the frames from touching. Would highly recommend these as great quality.I have attached a photo to show you how I mounted them.
JimB
Reviewed in the United States on April 29, 2013
This product works great. It is functional and flexible. It would be better if the traps came with the required hardware for the mounting to the tracks.
JAK
Reviewed in the United States on April 29, 2012
UPDATE: 5.4.2012 Replacement fork mount trap works just fine, no issues with screw bolt on this one. Mounting hardware for fork came with the track, not the fork. 3 mounting hardware kits come with track. This was not explained very clear. All Good now. 5 STARSThis review is for the fork mount trap. On the website there is no specific mention that the mounting bolts/hardware ships with the mounting fork. There is no specific mention that there is NO mounting bolts/hardware that will ship with the fork. It does mention there is mounting hardware for the "SYSTEM". So first issue, 1)no mounting hardware, to mount the Saris mount fork, to the Saris track.2) second issue the screw bolt to tighten your bicycle forks to the Saris fork mount trap were cross threaded, defective..... as after 2 turns the nut stopped to turn. Took a wrench with excessive force to tighten it, and again to loosen it. I know the other reviews were all 5's and I feel that this is an isolated incident for the Saris product. Amazon customer service is expediting a replacement fork mount. The entire system is exactly what I was looking for, and that is rare for me to find such a product. Great concept. The Amazon order arrived just as I was leaving for a 3hr trip, and with no mounting hardware had to lie the bike down unsecured for the trip. After an hour at a local hardware store was able to find pieces that would work. If the 2nd mount is defective, there are alternative fork mount choices on Amazon.