Your cart is empty.
Your cart is empty.#1. Standard Wire Harness This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio's name can be found on the face of the radio). #2. Premium Wire Harness Module This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features #3. Premium Wire Harness Module w/ Steering Wheel Control This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features. This harness also allows you to keep your factory steering wheel controls and use them with your aftermarket radio.
Kade michels
Reviewed in the United States on January 25, 2025
Good project, decent quality but for anyone installing with the harness in a 06+ you will need to take the red ignition wire and tap into the cigarette lighter for it to work, the pin on the adapter goes to nothing in the main harness
Eric Carvajal
Reviewed in the United States on August 31, 2024
Saved me a ton of money from buying at the dealership. Was an easy install and looks great!
Herman
Reviewed in the United States on August 21, 2024
Installed a double den radio.
George LoweIII
Reviewed in the United States on February 27, 2024
Product fit great and looks really good. But Dodge does not sell new AC baffles seperat form the dash. So you have to remove the old baffles and glue them to the new dash. It's an issue with Dodge not the part
Patrick farrell
Reviewed in the United States on February 1, 2024
Garbage broken at the top. To small to fit double din radio. Will need to be modified to work. 2nd one that I received broken. Do not buy
travis
Reviewed in Canada on January 31, 2024
Product is fine but... all handwear loose in box scratching and chipping paint during shipping
Bill
Reviewed in Canada on May 14, 2023
Product came as described and well packaged, quick response to any questions asked and very friendly..
Wendy Harrelson
Reviewed in the United States on March 6, 2020
I ordered this for a "stock" look for my truck. This order was very frustrating. I will convey it as I see it and leave conclusions to you. Once ordered, I was looking forward to delivery and installation. However, the seller requires a signature for delivery. I did not notice this in the advertisement. It may be mentioned there, but I did not see it. When the unit was attempted for delivery, I was not home. The delivery required a signature which my 13 year old son was uncertain about. He refused to sign for the delivery. Upon refusal to accept the unit, the delivery company returned the unit to the seller. I am very frustrated that a 13 year old can modify my purchases. To be honest, he is 6' tall. He also should not have answered the door. But the purchase was modified by a minor who should not have the authority to modify my decisions.I reached out to the seller to understand why the order was not delivered and learned the facts as described. They indicated that since the order was returned for failure to sign, an additional shipping fee was required. The email conversation with the seller at this point was extremely difficult. I inquired about how to complete the order and the response was partially complete. I inquired multiple times about how to proceed and was given only partial information. The email exchange took about an additional month. It was very painful extracting the needed information from the seller about how to proceed. Ultimately, they did publish an additional listing on Amazon specifically for me to purchase to pay for the additional shipping.In the end, I understand that the seller is not responsible for the refusal to sign. I also believe that this purchase requirement should be very clear to a buyer. It was not. All around better communication was required.After all the effort to receive the item, I was only thinking about installing it as soon as possible. The dimensional specifications are excellent. However, the color is far enough off that I am planning to paint it to match the interior.Would I make this purchase again? I don't think so. It was too difficult. The advertisement was not clear about delivery requirements. After much begging for information (via email) on how to proceed, I finally was able to complete the purchase. Installation was pretty easy. I did use a soldering iron to weld the vents on and it worked well. The fit is perfect, but the color is way off. I am now looking for a custom paint to finish the install. The quote I received last week for a custom plastic bonding paint was several hundred dollars. I am still figuring my path forward.
Andrew J. Wood
Reviewed in the United States on October 25, 2019
This Double Din Dash plate will fit just about any of the (US size) double din stereo's... The color is pretty close to matching the grey factory dash colors.The kit came with the dash face, a very basic aftermarket wire harness, The antenna cable, and 2 plastic mounting brackets for a double din...If you have a 2008 Dodge Ram 1500 then you will probably not be able to use the basic wire harness that comes with this kit, I had to by a $107 harness at a stereo shop to get my radio to work... (The harness that comes with this kit should be good for 2007 and older Ram trucks.)Over all I do like the clean lines and factory look this dash plate gives my truck, it was easy to install and it's made from sturdy materials... It's a Prime item so shipping was fast and it was packaged nicely.
Williams
Reviewed in the United States on February 21, 2017
THis dash bezel works and looks great. Be advised that the air conditioner vents do not come with the bezel. You will have to use the old ones from your old bezel. Sounds easy enough, except that the vents are plastic welded onto the original bezel. so you will have to do a little delicate cutting with a dremel to get the vents off of the old bezel. It's nothing difficult though, just tedious. I used automotive speed nuts to re-attach the vents to the new bezel. They worked like a charm. Another option is just to use an epoxy for plastic if you are looking for a more permanent option. All of the other parts of the dash just screw right on. I bought the silver and gray dash. The silver matches the other silver parts of the interior perfectly, but it lacks a bit of the sheen that was on the original dash. However, nobody will ever notice. The dash looks totally stock from the factory with a double din radio, which is what I wanted. The brackets for the radio worked great. The antenna adapter was nice as well. The wiring harness is useless. My truck is a 2007. I bought a metra wiring harness to retain the remote access power to the truck. Be advised that 2006-2009 rams do not have a remote access power wire running to the radio. The proper wiring harness costs about $50 on amazon. All in all, this bezel is well worth the money if you want a stock look. I didn't want to cut my factory bezel to install a double din because the truck is too nice to ruin the dash like that. And I didn't want the little semi-circles from the factory control knobs around my radio. So I looked at buying a navigation bezel and putting a dash kit in it, but that option would have costed close to $300, and I still would have had the cheap black plastic look around my radio. This bezel was almost $100 cheaper, and looks factory. So it was a win-win. I'll try to post pictures later.
jfoote
Reviewed in Canada on December 15, 2017
just what I needed worked great
Customer
Reviewed in Canada on October 5, 2017
Fits awesome . Looks awesome. clips it came with are a bit weak though
Recommended Products
