Shopping Cart

Your cart is empty.

Your cart is empty.

StarTech.com 1 ft. (0.3 m) VGA to BNC Cable - HD15 VGA to 5 BNC - Male/Female - BNC Cable - (VGABNCMF1),Black

Free shipping on orders over $29.99

$10.95

$ 5 .99 $5.99

In Stock

1.Style:Female Bnc


About this item

  • Connect a BNC video source to a VGA distribution amplifier or PC
  • VGA to BNC / 1ft VGA to BNC Cable / VGA to RGBHV / 1 ft Coax HD15 VGA to 5 BNC RGBHV Monitor Cable M/F
  • Short flexible cable design
  • Connect your wall mounted VGA TV or projector to your existing BNC cable runs
  • Connect your BNC connected cabled panels and projectors to a VGA distribution amplifier or PC


The VGABNCMF1 1-foot Coax HD15 VGA to 5 BNC RGBHV Adapter Cable features an HD15 VGA (male) connector and 5 BNC (RGBHV) (female) connectors, allowing you to connect your existing BNC video source to a VGA distribution amplifier or PC. The cable can also be used with a VGA out signal, breaking out to 5 BNC female connectors that can be used with a 5 BNC (M-M) cable for use with a BNC monitor/display.


Alex
Reviewed in Canada on January 24, 2025
They make a satisfying clinkling noise when you move them around
Dave_
Reviewed in the United States on May 14, 2024
I got this cable today and noticed it wasn't working. Out of curiosity I plugged the H into the V port and vice versa on my CRT and it works fine. Great cable, just they reversed the wiring lol
Michael Gergen
Reviewed in the United States on September 7, 2023
Checked the pins with a multimeter. Everything’s correct.I was successfully able to use a PVM with my R9 380 using CRT_emudriver.
カスタマー
Reviewed in Japan on May 18, 2023
映像出力が3本線でSync on Green(SoG)でグリーンに同期信号が合成されている旧型のコンピュータにて使用しています。モニターはDell U2311hbでSoGに対応しており、BNC側のR,G,Bのみ接続するとことで正常に使用できました。このケーブルのおかげで液晶モニターで映像が表示でき、現状の旧型コンピュータ専用20インチCRTが捨てられるので大変助かりました。他にも同様でさらに価格が安い商品がありましたが、過去の経験からStarTech製は品質が良さそうなのでこちらにしました。BNC側のケーブルが少し細い感じがして取り回しによっては断線があるかもしれないという感じですが、それほど高くないのでダメになったらまた購入すると思います。
Client d'
Reviewed in France on February 9, 2023
Bonne réception du colis en temps et en heure... Conforme à l'annonce... Parfait !
Chris P.
Reviewed in the United States on December 8, 2023
used this on a old tube from 1998 that was no longer displaying an image. Hooked the adapter up and plugged in a modern monitor and works flawlessly again.
Matthew B.
Reviewed in the United States on November 20, 2023
I was wondering why I would get a picture with this cable that could never sync vertically with RGBHV signals. Turns out that the cable is wired with the H and V pins reversed. *Gray* is horizontal/composite sync, while black is vertical (this is backwards when compared to Extron cables, which use black for horizontal/composite and yellow for vertical sync)The cables themselves are well-made, but the reversed H and V lines was baffling.
Antonio G.
Reviewed in Italy on August 22, 2020
L'ho comprato per poter impiegare con un vecchio proiettore che permetteva esclusivamente l'ingresso component. Dopo tanto tempo e numerose ore passate a riparare e ricondizionare quel vecchio proiettore, la più felice sorpresa è stata ripagata proprio grazie a questo cavo speciale che mi ha permesso di collegarlo a un moderno personal computer e poter finalmente vedere proiettato sul grande schermo anche i contenuti del PC. Resistente e ben fatto. Lo consiglio.
MrBlank
Reviewed in the United States on July 6, 2020
My JVC PVM didn't like the RGB component output from the MiSTer FPGA and was having trouble with sync on green. I tried this adaptor with the external sync cable instead. Then changed the MiSter config and the PVM to use external sync, and all my sync issues vanished. :-)
Vendy
Reviewed in the United States on June 24, 2020
I bought a StarTech VGABNC5 cable through Amazon in June 2020. It is wired incorrectly, won't work, and StarTech's customer service ignored me. I was cleaning up a cabinet of professional video gear and wanted to replace a too-long existing cable between two units. This seemed to fit the bill. But no signal would pass when I connected it. I used a VOM to discover that very few of the ground pins and connector shields are connected. Without a ground, no signal can flow. I suppose I could have run a separate ground wire, but why have to do that? If my units had been rack-mounted, the ground could have gone through the chassis, but that would still leave the signal wires unshielded and prone to picking up interference. Bad idea. I "chatted" with their customer service. He first tried to tell me that his passive wire was designed only to work in one direction! When I disputed that, he said he would have to do "research" and get back to me, and left me hanging for 45 minutes before he disconnected. I sure wasted a lot of time on a $12 cable! So no, don't buy.
cleotilde rodriguez
Reviewed in the United States on January 21, 2016
its ok
ZZR
Reviewed in Germany on July 17, 2015
Das war der Hauptgrund für mich, diesen Adapter zu kaufen: Sync-on-Green!Damit läßt sich eine VAX mit Originalkabel mit einem heutzutage handelsüblichen LCD-Display verbinden :)
DigiForceps
Reviewed in the United States on March 16, 2014
I had some BNC cables going from a patch cable on the side of the wall (VGA breakout) to the ceiling. The setup was initially intended for a large conference-room sized projector with the 5 BNC inputs, but those don't really exist anymore without spending a fortune. This adapter was exactly what I needed to merge those 5 BNCs back into VGA to connect into the projector. Worked like a charm. I was feeling ambitious and I replaced the one in the wall with a second one of these as well, since it was much higher quality than the cheap stuff that was in my patch box.I have to hand it to StarTech. I've relied on them time and time again to provide cheap but high quality cables and connectors that are otherwise pretty hard to find.