Your cart is empty.
Your cart is empty.Product Description
Package List
- 1x Ball joint separator
- 1x Tie rod end and ball joint remover
- 1x Conical pitman arm puller
- 1x Pitman arm and tie rod end puller
- 1x Pitman arm puller
- 1x Red case
Wide Usage
Ball joints require regular maintenance and replacement on average 75,000 to 150,000 miles or it may cause inconvenience and even safety hazards such as steering failure, instable driving and ball joint fracture. YSTOOL front end service tool kit is a necessary tool set in your garage for removing the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts.
Compatible with most imported and domestic minicars, compact cars, mid-size cars and light pickup trucks. May not fit for most full-size cars, mid-size and heavy-duty pickup, mid-size and heavy-duty trucks.
Ball Joint Separator
- This separator with 7/8" jaw spread, 1-3/4" throat depth and 1-1/16" & 2-1/8" (26 & 53mm) jaw opening.
- Apply to domestic and import front wheel drive vehicles, to separate multisize ball joint from spindle support arm.
- The design of press-type can separate ball joints without damaging the boots.
- Work with 21MM ratchet wrench.
Tie Rod End and Ball Joint Remover
- This universal puller tool with 0 to 2-1/2" jaw spread and 3-1/8" throat depth, has adjustable swing arms
- Designed to remove multisize tie rods and ball joints.
- Wedge shape jaw makes it easier to insert into the ball joint opening.
- Work with 17MM ratchet wrench.
Conical Pitman Arm Puller
- This puller with 3/4" jaw spread
- Apply to pitman arms on minicars, compact & mid-size cars, and light-duty trucks.
- Conical design allows this tool to be installed on pitman arms firmly.
- Work with 18MM ratchet wrench.
Pitman Arm and Tie Rod End Puller
- This puller with 1-1/8" jaw spread, 2-1/2" throat depth
- Designed to work as pitman arm remover on most small rear wheel drive vehicles and also can be used as a tie rod end puller for most small domestic and import cars.
- Work with 19MM ratchet wrench.
Pitman Arm Puller
- This puller tool with 1-3/8" jaw spread and 1-7/8" throat depth
- Fit pitman arms on minicars, compact & mid-size cars, and light-duty trucks.
- Work with 17MM ratchet wrench.
Customer
Reviewed in the United States on January 31, 2024
This kit included all of the pullers needed to pull tie rod ends and ball joints/control arms from my mercedes c300. The pullers showed no signs of bending or thread damage after applying lots of torque with an impact and a breaker bar.
Alejandro a.
Reviewed in Mexico on March 12, 2023
Buenísima herramienta material muy resistente y práctico facilita los trabajos en la mecánica
Racheal Lewis
Reviewed in the United States on November 10, 2023
Great tool
Gary A.
Reviewed in the United States on September 6, 2022
It work very for job that I did
R.J.
Reviewed in the United States on August 27, 2022
Not the best quality but on par for those occasional jobs. I wasn’t comfortable using them as the metal seemed cheap and could be nasty if something failed.
SSB
Reviewed in the United States on March 7, 2022
I was skeptical from some of the reviews, specifically for heavy duty trucks. I only needed the larger tool pictured. It removed both tie rods and the pitman arm tie rod. I sprayed the tie rods with PB blaster, waited 10 minutes, snugged down the tool, tapped the knuckle with a small sledge, snugged it down some more, sprayed PB blaster… tapped on the knuckle, repeat one more time and it broke loose. Just take your time, tap with a hammer and wait till it breaks loose. These tie rods were 20 years old!
Shine E dawg
Reviewed in the United States on November 9, 2022
I AM TICKELED WITH THIS SET IT WORKS GREAT HAS EVERYTHING I NEEDED TO DO MY JOB THANKS
Lyndsey
Reviewed in the United States on December 16, 2020
This was good for what you pay
Kindle Customer
Reviewed in the United States on November 29, 2020
I purchased this set for my husband. It came quickly and in a nice case. The set was exactly what he needed and he was able to replace his ture rod ends with ease. We've owned the set for a month now and it's been used 4 times with no issues.
Recommended Products